View 74F06A_315038.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INTEGRATED CIRCUITS
74F06, 74F06A, 74F07, 74F07A Inverter/buffer drivers
Product specification IC15 Data Handbook 1992 Jul 24
Philips Semiconductors
Philips Semiconductors
Product specification
Hex inverter/buffer drivers (open-collector)
74F06, 74F06A, 74F07, 74F07A
FEATURES OF 74F06, 74F07
* Open Collector output drive 64mA * High speed * 12V output termination voltage * Symmetrical propagation delays
TYPE 74F06 74F06A 74F07 74F07A
TYPICAL PROPAGATION DELAY 3.5ns 9.0ns 4.5ns 10.0ns
TYPICAL SUPPLY CURRENT (TOTAL) 30mA 30mA 32mA 32mA
FEATURES OF 74F06A, 74F07A
* Open Collector output drive 48mA * High speed * 30V output termination voltage * Replaces 74F06 and 74F07 * Improved performance upgrade for 74F06 and 74F07 * Reduced IOH leakage @ 30V
ORDERING INFORMATION
DESCRIPTION 14-pin plastic Dual In-line Package 14-pin plastic Small Outline COMMERCIAL RANGE VCC = 5V 10%, Tamb = 0C to +70C N74F06N, N74F06AN N74F07D, N74F07AD PKG DWG # SOT27-1 SOT108-1
PIN CONFIGURATIONS
74F06/74F06A
A0 Y0 A1 Y1 A2 Y2 GND 1 2 3 4 5 6 7 14 13 12 11 10 9 8 VCC A5 Y5 A4 Y4 A3 Y3 A0 Y0 A1 Y1 A2 Y2 GND 1 2 3 4 5 6 7
74F07/74F07A
14 13 12 11 10 9 8 VCC A5 Y5 A4 Y4 A3 Y3
SF00016
SF00017
LOGIC SYMBOLS
74F06/74F06A
1 3 5 9 11 13 1
74F07/74F07A
3 5 9 11 13
A0
A1 A2
A3 A4 A5
A0
A1 A2
A3 A4 A5
Y0
Y1 Y2 Y3 Y4 Y5
Y0
Y1 Y2 Y3 Y4 Y5
2 VCC = Pin 14 GND = Pin 7
4
6
8
10
12 VCC = Pin 14 GND = Pin 7
2
4
6
8
10
12
SF00018
SF00019
July 24, 1992
2
853-1122 07270
Philips Semiconductors
Product specification
Hex inverter/buffer drivers (open-collector)
74F06, 74F06A, 74F07, 74F07A
IEC/IEEE SYMBOLS
74F06/74F06A
1 2 1
74F07/74F07A
2
3
4
3
4
5
6
5
6
9
8
9
8
11
10
11
10
13
12
13
12
SF00020
SF00021
LOGIC DIAGRAMS
74F06/74F06A
A0 A1 A2 A3 A4 VCC = Pin 14 GND = Pin 7 A5 1 3 5 9 11 13 2 4 6 8 10 12 Y0 Y1 Y2 Y3 Y4 Y5 VCC = Pin 14 GND = Pin 7 A0 A1 A2 A3 A4 A5 1 3 5 9 11 13
74F07/74F07A
2 4 6 8 10 12 Y0 Y1 Y2 Y3 Y4 Y5
SF00022
SF00023
INPUT AND OUTPUT LOADING AND FAN OUT TABLE
PINS An An Yn Yn Yn Yn Data inputs ('F06, 'F07) Data inputs ('F06A, 'F07A) Data outputs ('F06) Data outputs ('F06A) Data outputs ('F07) Data outputs ('F07A) DESCRIPTION 74F (U.L.) HIGH/LOW 1.0/1.0 1.0/0.7 OC/106.7 OC/80 OC/106.7 OC/80 LOAD VALUE HIGH/LOW 20A/0.6mA 20A/0.4mA OC/64mA OC/48mA OC/64mA OC/48mA
NOTES: 1. One (1.0) FAST unit load is defined as: 20A in the High state and 0.6mA in the Low state. 2. OC = Open Collector
FUNCTION TABLE
INPUTS 'F06, 'F06A An L H NOTES: 1. H = High voltage level 2. L = Low voltage level Yn H L OUTPUTS 'F07, 'F07A Yn L H
July 24, 1992
3
Philips Semiconductors
Product specification
Hex inverter/buffer drivers (open-collector)
74F06, 74F06A, 74F07, 74F07A
ABSOLUTE MAXIMUM RATINGS
(Operation beyond the limit set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free air temperature range.) SYMBOL VCC VIN IIN VOUT IOUT Tamb Tstg Supply voltage Input voltage Input current Voltage applied to output in High output state 'F06, 'F07 'F06A, 'F07A Current applied to output in Low output state 'F06, 'F07 'F06A, 'F07A Operating free air temperature range Storage temperature range PARAMETER RATING -0.5 to +7.0 -0.5 to +7.0 -30 to +5 -0.5 to 12 -0.5 to 30 128 96 0 to +70 -65 to +150 UNIT V V mA V V mA mA C C
RECOMMENDED OPERATING CONDITIONS
SYMBOL PARAMETER MIN VCC VIH VIL IIk VOH Supply voltage High-level input voltage Low-level input voltage Input clamp current High-level output voltage 'F06, 'F07 'F06A, 'F07A IOL Low-level output current 'F06, 'F07 'F06A, 'F07A Tamb Operating free air temperature range 0 4.5 2.0 0.8 -18 12 30 64 48 +70 LIMITS NOM 5.0 MAX 5.5 V V V mA V V mA mA C UNIT
July 24, 1992
4
Philips Semiconductors
Product specification
Hex inverter/buffer drivers (open-collector)
74F06, 74F06A, 74F07, 74F07A
DC ELECTRICAL CHARACTERISTICS
(Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL PARAMETER TEST CONDITIONS1 MIN IOH High-level output current Low-level output voltage 'F06, 'F07 'F06A, 'F07A VCC = MIN, VIL = MAX, VOH = MAX, VIH = MIN MAX VCC = MIN, VIL = MAX, VIH = MIN VIK II IIH IIL Input clamp voltage Input current at maximum input voltage High-level input current Low-level input current 'F06, 'F07 'F06A, 'F07A ICC Supply current (total) 74F06, 74F06A 74F07, 74F07A ICCH ICCL ICCH ICCL VCC = MAX 5.0 30 10 32 VCC = MIN, II = IIK VCC = MAX, VI = 7.0V VCC = MAX, VI = 2.7V VCC = MAX, VI = 0.5V IOL = MAX 10% VCC 5% VCC 0.30 0.30 -0.73 LIMITS TYP2 MAX 250 100 0.50 0.50 -1.2 100 20 -0.6 -0.4 8.0 43 14 45 A A V V V A A mA mA mA mA mA mA UNIT
VOL
NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25C. 3. Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last.
AC ELECTRICAL CHARACTERISTICS
LIMITS SYMBOL PARAMETER TEST CONDITION VCC = +5.0V Tamb = +25C CL = 50pF, RL = 100 Min tPLH tPHL g y Propagation delay An to Yn 'F06 Waveform 1 'F06A 'F07 Waveform 2 'F07A 2.0 1.5 5.0 2.0 2.0 3.0 6.0 5.0 Typ 3.5 3.0 9.0 4.0 4.0 5.0 10.5 7.5 Max 6.0 5.5 11.0 6.0 6.0 7.0 13.0 10.0 VCC = +5.0V 10% Tamb = 0C to +70C CL = 50pF, RL = 100 Min 1.5 1.0 4.0 2.0 2.0 2.5 5.0 4.0 Max 6.5 6.0 15.0 8.0 6.5 7.5 17.0 13.0 ns ns ns ns UNIT
tPLH tPHL
Propagation delay g y An to Yn
July 24, 1992
5
Philips Semiconductors
Product specification
Hex inverter/buffer drivers (open-collector)
74F06, 74F06A, 74F07, 74F07A
TYPICAL PROPAGATION DELAYS VERSUS LOAD FOR OPEN COLLECTOR OUTPUTS
18
16
14
tPLH
A versions
12 Propagation delay (ns)
10
8 tPLH
non-A versions
6
4
2
tPHL
both versions
0 0 100 200 300 Load resistor () 400 500 600
SF00024
NOTE: When using Open-Collector parts, the value of the pull-up resistor greatly affects the value of the tPLH. For example, changing the specified pull-up resistor value from 500 to 100 will improve the tPLH up to 50% with only a slight increase in the tPHL. However, if the value of the pull-up resistor is changed, the user must make certain that the total IOL current through the resistor and the total IIL's of the receivers does not exceed the IOL maximum specification.
July 24, 1992
6
Philips Semiconductors
Product specification
Hex inverter/buffer drivers (open-collector)
74F06, 74F06A, 74F07, 74F07A
AC WAVEFORMS
An An VM tPLH
VM tPHL
VM tPLH
VM tPHL
Yn
VM
VM
Yn
VM
VM
SF00025
SF00026
Waveform 1. Propagation delay for inverting outputs NOTE: For all waveforms, VM = 1.5V.
Waveform 2. Propagation delay for non-inverting outputs
TEST CIRCUIT AND WAVEFORMS
VCC 7.0V 90% VIN PULSE GENERATOR RT D.U.T. VOUT RL NEGATIVE PULSE VM 10% tTHL (tf ) CL RL tTLH (tr ) 90% POSITIVE PULSE 10% tTHL (tf ) AMP (V) 90% VM tw 10% 0V tw VM 10% tTLH (tr ) 0V 90% AMP (V)
Test Circuit for Open Collector Outputs
VM
DEFINITIONS: RL = Load resistor; see AC electrical characteristics for value. CL = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. RT = Termination resistance should be equal to ZOUT of pulse generators.
Input Pulse Definition INPUT PULSE REQUIREMENTS family amplitude VM 74F 3.0V 1.5V rep. rate 1MHz tw 500ns tTLH 2.5ns tTHL 2.5ns
SF00027
July 24, 1992
7
Philips Semiconductors
Product specification
Inverter/buffer drivers
74F06, 74F06A, 74F07, 74F07A
DIP14: plastic dual in-line package; 14 leads (300 mil)
SOT27-1
1992 Jul 24
8
Philips Semiconductors
Product specification
Inverter/buffer drivers
74F06, 74F06A, 74F07, 74F07A
SO14: plastic small outline package; 14 leads; body width 3.9 mm
SOT108-1
1992 Jul 24
9
Philips Semiconductors
Product specification
Inverter/buffer drivers
74F06, 74F06A, 74F07, 74F07A
Data sheet status
Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product.
Production
[1] Please consult the most recently issued datasheet before initiating or completing a design.
Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
Disclaimers
Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Document order number: Date of release: 10-98 9397-750-05054
Philips Semiconductors
yyyy mmm dd 10

▲Up To Search▲

Price & Availability of 74F06A

	To Download 74F06A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .